Eye Brow Windows #3: Building the Windows
Ok, now for the actual building of the eyebrow windows. This is where we left off. Remember that the side pieces are 3/8” plywood 43” tall, 1 1/2” at the bottom tapered to 33” at the top. After attaching the side pieces, I was able to measure around the circumference of the arch and determine the length of the top pieces. I used 3/8” bendy board (flex-core) and cut a slight angle on each end where it attaches to the plywood on the sides. The bendy board goes from 33” on each end to 43” out in the very center. I again radiused this off the template furnished by our installers. I then glued the bendy board to the plywood with titebond III glu...